Мы на TwitterМы на YoutubeМы на Facebook


Gas conpressor equipment GPA-6.3/8RMGas conpressor equipment GPA-6.3/8RM 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-6.3/8RM is an automated 8MW gas compressor set of either outdoor or indoor design. The unit has been designed based on the latest gas industry requirements for reconstruction of existing (with outdated drives replacement) and construction of new compressor stations.

GTD-6.3RM/8 gas turbine engine (NPO Saturn, Rybinsk) is used as a drive. GPA-6.3/8RM is one of the most advanced units; it demonstrates high technical and economic performance thus maintaining fine technical level of gas transmission facilities.

GPA-6.3/8RM has high engine efficiency compared to that of similar products and equipment with higher ratings.

The set fully complies with technical and operational requirements for gas transmission equipment and has an advanced remote control system with a high degree of protection.

Rated power, MW
8.0
Efficiency, %
34.5
Gas fuel flow at nominal rating, kg/h 1 672
Power turbine shaft rated speed, rpm 8 200
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

Gas compressor equipment GPA-10RM NyuksenicaGas compressor equipment GPA-10RM Nyuksenica 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

Under the Gazprom long-term cooperation program the company has developed and launched into production 10 MW GPA-10RM gas compressor sets used for upgrading of existing compressor stations and construction of new ones at gas pipelines and underground gas storage facilities. The units are supplied either in outdoor or indoor design.

GTD-10RM gas turbine engine (PAO UEC - Saturn, Rybinsk) is used as a drive.

The units showed excellent results during operation and fully comply with technical and operational requirements established for gas transmission equipment; they are quipped with an advanced remote control system with a high degree of protection.

Rated power, MW
10.2
Efficiency, %
35.5
Gas fuel flow at nominal rating, kg/h 2 045
Power turbine shaft rated speed, rpm 4 800
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

 

Gas compressor equipment GPA-16 ArlanGas compressor equipment GPA-16 Arlan 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-16 is an automated outdoor gas compressor set (GCS) rated at 16 MW designed under the Gazprom cooperation program. The unit is aimed to replacement of obsolete and worn-out GCS and construction of new ones as well.

Gas turbine engines with high performance, such as  NK-38ST (Kuznetsov, Samara), AL-31ST (UMPO, Ufa) and PS-90GP-2 (Aviadvigatel, Perm) can be used as  GPA-16 gas compressor set  drives.

For the first time a gas treatment unit is integrated in GCS design to supply gas fuel taken directly from compressor inlet  to gas turbine unit.

The unit is pre-fabricated providing minimization of assembly pieces for shipment. Such design allows reducing transportation and installation costs at site. 

GCS enclosure allows locating gas turbine engine and centrifugal compressor rated at 25 MW with minimum modification. Integrated stationary cleaning unit for gas-air flow path cleaning and handling devices are available in the unit.

This gas compressor set stands out among the similar products in terms of operation and maintenance in severe weather conditions. All operational conditions – climatic characteristics, fire and environmental safety requirements as well as provisions for installation on the existing foundations have been taken in consideration in GPA-16 design.

Rated power, MW
16,0
Efficiency, %
36,3
Gas fuel flow at nominal rating, kg/h 3 175
Power turbine shaft rated speed, rpm 5 300
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

Gas compressor equipment GPA-25Gas compressor equipment GPA-25 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-25 gas compressor set is one of the UEC - Gas Turbines, JSC recent developments. The set embodies the most sophisticated gas turbine and compressor technologies and shows high performance.

Both NK-36ST (Kuznetsov, Samara) and PS-90GP-25 (Aviadvigatel, Perm) gas turbine engines (following customer request) can be used as a centrifugal compressor drive. One of the three centrifugal compressor sites can be used in GPA-25 scope: either with lubrication oil system and oil seal or with lubrication oil system and dry gas seal or with rotor magnetic bearing and dry gas-dynamic seal.

GPA-25 was chosen by Gazprom for compressor stations construction at South Stream gas pipeline.

Rated power, MW
25.0
Efficiency, %
37.9
Gas fuel flow at nominal rating, kg/h 4 475
Power turbine shaft rated speed, rpm 5 000
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

 

CONTACTS

FOR INFORMATION
+7-4855-293-205, This email address is being protected from spambots. You need JavaScript enabled to view it.
SALES
+7-4855-293-216, 293-884, +7-495-783-66-39
This email address is being protected from spambots. You need JavaScript enabled to view it.
SUPPLY
+7-4855-293-714, This email address is being protected from spambots. You need JavaScript enabled to view it.
FOR MEDIA
+7-4855-293-493, 293-469, This email address is being protected from spambots. You need JavaScript enabled to view it.
SERVICE
+7-4855-293-157, This email address is being protected from spambots. You need JavaScript enabled to view it.

PARENT COMPANIES