Мы на TwitterМы на YoutubeМы на Facebook

 


Gas compressor equipment GPA-4RM KrasnoznamenskoeGas compressor equipment GPA-4RM Kasimov

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-4RM is an automated 4 MW gas compressor set capable of unmanned operation, either indoor or outdoor design. The unit is designed for gas injection at underground gas storage facilities (UGS) and gas transfer via gas pipelines.

The equipment demonstrates high technical and economic performance thus maintaining fine technical level of gas transmission facilities. The unit can be installed on existing basement in the workshop.

The equipment fully complies with latest technical and operational requirements for gas industry, it has an advanced remote control system with a high degree of protection.

GTD-4RM gas turbine engine (NPO Saturn, Rybinsk) rated at 4 MW is used as a drive. The engine is designed based on М-75R marine engine. The set allows for application of either centrifugal compressor with dry seals or reciprocating compressor (GPA-4RMP).

In 2007, GPA-4RM gas compressor set became a winner of the Russian Quality national program. In 2012, this unit became a winner of the All-Russian competition 100 Best Russian Products.

Rated power, MW
4.1
Efficiency, %
32.5
Gas fuel flow at nominal rating, kg/h 935
Power turbine shaft rated speed, rpm 12 500
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

Gas compressor equipment GPA-5.5 TaurusGas compressor equipment GPA-5.5 Taurus 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-5.5 gas compressor set has been developed and launched into production in the framework of cooperation with Solar Turbines Inc. (U.S.A.), a global leader in power engineering industry. The unit has been designed using the experience of the world leading gas turbine manufacturer. Taurus 60, one of the most advanced gas turbine engines produced by Solar Turbines Inc., was used  as a compressor drive thus offering  excellent technical, economic and environmental performance of the unit. The engineering and design solutions implemented in GPA-5.5 gas compressor set has made it one of the best in this class.

This unit is designed for application at underground gas storage facilities (UGS) and for gas transfer via gas trunk lines.  GPA-5.5 gas compressor sets have indoor enclosed design.

Taurus is a trademark of Solar Turbines Incorporated.

Rated power, MW
5.7
Efficiency, %
31.5
Gas fuel flow at nominal rating, kg/h 1 029
Power turbine shaft rated speed, rpm 13 950
Overhaul life expectancy, h
30 000
Assigned life expectancy, h
200 000
Service life, years
 25
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

Gas conpressor equipment GPA-6.3/8RMGas conpressor equipment GPA-6.3/8RM 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

GPA-6.3/8RM is an automated 8MW gas compressor set of either outdoor or indoor design. The unit has been designed based on the latest gas industry requirements for reconstruction of existing (with outdated drives replacement) and construction of new compressor stations.

GTD-6.3RM/8 gas turbine engine (NPO Saturn, Rybinsk) is used as a drive. GPA-6.3/8RM is one of the most advanced units; it demonstrates high technical and economic performance thus maintaining fine technical level of gas transmission facilities.

GPA-6.3/8RM has high engine efficiency compared to that of similar products and equipment with higher ratings.

The set fully complies with technical and operational requirements for gas transmission equipment and has an advanced remote control system with a high degree of protection.

Rated power, MW
8.0
Efficiency, %
34.5
Gas fuel flow at nominal rating, kg/h 1 672
Power turbine shaft rated speed, rpm 8 200
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

Gas compressor equipment GPA-10RM NyuksenicaGas compressor equipment GPA-10RM Nyuksenica 2

  • DESCRIPTION

  • PROPERTIES

  • APPLICATIONS

  • MAKE A REQUEST

Under the Gazprom long-term cooperation program the company has developed and launched into production 10 MW GPA-10RM gas compressor sets used for upgrading of existing compressor stations and construction of new ones at gas pipelines and underground gas storage facilities. The units are supplied either in outdoor or indoor design.

GTD-10RM gas turbine engine (PAO UEC - Saturn, Rybinsk) is used as a drive.

The units showed excellent results during operation and fully comply with technical and operational requirements established for gas transmission equipment; they are quipped with an advanced remote control system with a high degree of protection.

Rated power, MW
10.2
Efficiency, %
35.5
Gas fuel flow at nominal rating, kg/h 2 045
Power turbine shaft rated speed, rpm 4 800
Overhaul life expectancy, h
25 000
Assigned life expectancy, h
100 000
Service life, years
 20
Delivery period, months
9 - 12
Installation period, months
2 - 3

Gas compressor sets

Gas turbine gas compressor units
Gas compressor sets are designed for application at underground gas storage facilities (UGS) and gas transfer via gas pipelines.
The sets demonstrate high technical and economic performance thus maintaining fine technical level of gas transmission facilities.
All the sets fully comply with technical and operational requirements for gas transmission equipment and have an advanced remote control system with a high degree of protection.
The units can be designed in two options: outdoor or indoor.

Download the list of gas compressor sets (doc, 65 KB)

 

Please fill out the questionnaire in as much detail as possible.

The initial information received will be used to determine and calculate the equipment key parameters and estimate roughly its cost. Based on the data provided a technical proposal will be prepared taking into account your requirements and energy consumption conditions.

You can send us a filled out questionnaire by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it. and a copy at This email address is being protected from spambots. You need JavaScript enabled to view it.,

or by fax +7 (4855) 293-699.

Please note that a preliminary calculation based on the initial parameters provided in the questionnaire is made free of charge and filling out the questionnaire is non-binding for you. 

Download the questionnaire for gas compressor sets

 

CONTACTS

FOR INFORMATION
+7-4855-293-205, This email address is being protected from spambots. You need JavaScript enabled to view it.
SALES
+7-4855-293-216, 293-884, +7-495-783-66-39
This email address is being protected from spambots. You need JavaScript enabled to view it.
SUPPLY
+7-4855-293-714, This email address is being protected from spambots. You need JavaScript enabled to view it.
FOR MEDIA
+7-4855-293-493, 293-469, This email address is being protected from spambots. You need JavaScript enabled to view it.
SERVICE
+7-4855-293-157, This email address is being protected from spambots. You need JavaScript enabled to view it.

PARENT COMPANIES